JAUOPAY Electric Bicycle Conversion Motor Kit 48V 1000W 28 Rear Hub Wheel EBIKE 28mile/h (45km/h) High Speed. Built to the highest international standards, CE. 48 V 1000 W and 750 W Super Power Brushless Gearless Hub Motor. To 750 W as a Road Legal kit.Works with all pedals, including Speedplay and Eggbeaters. Rare-earth metal magnet are used in the motor to efficiently produce large power. Brake Levers can cut off the power supply to the motor safely. 8 Point Crank High Efficiency speed sensor for pedal assist. Dual Mode Controller, Motor works under Hall effect and non-Hall effect, extend life for electric bicycle.
If the components break down, controller will switch into non-hall effect mode, the motor will still be working. The 1000W system requires a 48 Volt battery with a nominal capacity not less than 11.6Ah.
Brushless Gearless Rear Hub Motor. 1000W or 750W / 48V. Frame Diameter: 24.92 (63.3 cm). Suitable for 28", 29", 700 CC Bicycle Wheel.
Frame Width: 0.94 (2.4 cm). Suitable for 28" x 1.75"1.95", 29" x 1.75"1.95" Tires. Motor Diameter: 9.84 (25 cm). Motor width: 1.57 (4 cm). The 27 mm high magnetic steel provide high stability of motor power.
Dropout: 5.31 (13.5 cm). M14 bolt size of axle. Fine rubber handle bar and a twist throttle which has battery level display and power-cut off button.Connected your brake wire to the brake Levers can do both liner brake and cutting off the power supply to the motor safely. 8 point high effective Pedal Assist System (PAS) can activate the hub motor with the pedal driving, allows you to combine electric power and your own effort with a nice and easy riding way. Binding Pipe & Cable Tie to fix the wire onto the bike frame. Protect the wire from swinging and keep your bike tidy.